SPACES UP TO
930 SQ. FT.
2-SPEED & ON/OFF
Designed for home spaces up to 930 sq. ft.
No cutting of ceiling joists required. Damper box fits between 16 in. or 24 in. on-center ceiling joists.
2-speed operation with included dual high/low and on/off wall switch
Galvanized steel fan housing and plenum box with R5 insulation
Save money on your cooling bills and reduce stress on A/C equipment
Requires 535 sq. in. of NFA
Galvanized Steel Fan Housing and Plenum Box
2-Speed Thermally Protected Motor
Rated for 6 Amps - Draws 5.2 (HI) and 3.1 (LOW) in operation
120 Volts, 60 Hz
Fan: 22.5 in. H x 22.75 in. W x 13.25 in. D
Damper Box: 12 in. H x 23 in. W x 15 in. D
Box 1, Damper: 24.375 in. H x 16.625 in. W x 13.563 in. D
Box 2, Fan: 24.25 in. H x 23.75 in. W x 25.25 in. D
Box 1: 17 lbs.
Box 2: 46.5 lbs.
|Multi UPC Info|
|Country of Origin - Assembly|
US from Domestic and Imported Components
Includes fan, hanging bracket, duct and transition assembly, damper assembly box, intake grille with mounting screws, rafter bracket, and hi/low and on/off switches
Noise: 9.1 sones
Maxx Air, Cool Attic
This series is designed to fit between 16 or 24 inch on-center ceiling joists, eliminating the need for cutting and removing a joist during installation. Each fan has a pre-installed hanging bracket on the fan assembly and also includes a rafter bracket to make your install as simple as possible.
Typical whole house fans have a fan unit that sits close to the shutter (and thus your ceiling) when installed. With our new modern whole house fan design, the fan assembly is installed up to 12 feet away from the plenum box with the included duct, all but eliminating noise when in use.
Whole house fans pull cool air from open windows and doors throughout the house and push stale, warm air upwards to escape through your attic, making them a perfect alternative to an air conditioner in moderate climates. Feel instantly refreshed with this energy-saving cooling measure!